www.ti.com
2.1.4
Power Up
Operation
Table 1. Gain Settings
GAIN0 (J5)
(1)
GAIN1 (J6)
(1)
Amplifier Gain (dB)
ON
ON
6
ON
OFF
10
OFF
ON
15.6
OFF
OFF
21.6
(1)
OFF = Jumper removed; ON = Jumper installed
1. Verify correct voltage and input polarity, and turn on the external power supplies.
The EVM should begin operation.
2. Adjust the input signal.
3. Adjust the control inputs to the desired settings.
4. Adjust the amplifier gain by installing/removing the gain jumpers, J5 and J6.
List of Tables
4
SLOU204 – August 2007