Figure 6-5. Thermal Pad Selector with Shunt
Connecting a shunt between pins 1 and 2 of this header will tie the thermal pad of U1 to GND, while connecting
pins 2 and 3 will tie the thermal pad of U1 to V
SS
. Leave pin 2 of this header unconnected to allow the thermal
pad to float, or use an external connection to tie the thermal pad to any other potential.
Setup
SCDU027 – AUGUST 2021
TMUXRTJ-RRQEVM User's Guide
13
Copyright © 2022 Texas Instruments Incorporated
