Texas Instruments TMS320C6 Series, User Manual

Page: 77 / 304

Descriptions of the Different Kinds of Windows and Their Contents
3-11 The Debugger Display
If a function name is listed in the CALLS window, you can easily display the
function code in the FILE window:
1) Point the mouse cursor at the appropriate function name that is listed in
the CALLS window.
2) Click the left mouse button. This displays the selected function in the FILE
window.
1) Make the CALLS window the active window (see Section 3.4 on page
3-21).
↓
↑
2) Use the arrow keys to move up/down through the list of function names
until the appropriate function is indicated.
F9
3) Press
F9
. This displays the selected function in the FILE window.
You can close and reopen the CALLS window.
-
Closing the window is a two-step process:
1) Make the CALLS window the active window.
2) Press
F4
.
-
To reopen the CALLS window after you’ve closed it, enter the CALLS
command. The format for this command is:
calls