Texas Instruments TMS320C6 Series User Manual Download Page 64

Page: 64 / 304

Change Some Values

2-28

Change some values

You can edit the values displayed in the MEMORY, CPU, WATCH, and DISP
windows.

Important!

Make sure no other windows are obscuring your view of the

MEMORY window.

Change a value in memory:

1) Display memory beginning with address 0x0100:

mem 0x100

2) Point to the contents of memory location 0x0100. (The con-

tents of memory location 0x0100 are in the second column of
the MEMORY window.)

3) Click the left mouse button.

Notice that this highlights and

identifies the field to be edited.

4) Type 00000000.

5) Press to enter the new value.

6) Press to conclude editing.

Try This:

Here’s another method for editing data.

1) Make the CPU window the active window:

win CPU

↑

↓

→ ←

2) Press the arrow keys until the field cursor ( _ ) points to the contents of reg-

ister B15.

3) Press

to highlight the contents of register B15.

4) Type ffff0000.

5) Press

to enter the new value.

ESC

6) Press

ESC

to conclude editing.

Summary of Contents for TMS320C6 Series

















































































































































































































































































































Search results

Summary of Contents for TMS320C6 Series

Reviews:

Brands by name

Popular brands

Texas Instruments TMS320C6 Series, User Manual

Search results

Summary of Contents for TMS320C6 Series

Reviews:

Brands by name

Popular brands