manualshive.com logo in svg

Texas Instruments TMS320C6 Series, User Manual

Share
Download
Texas Instruments TMS320C6 Series User Manual Download Page 248

win, wr

Alphabetical Summary of Debugger Commands

 

11-44

Select Active Window

win

Syntax

win

WINDOW NAME

Menu selection

none

Environments

basic debugger

profiling

Description

The WIN command allows you to select the active window by name. Note that
the 

WINDOW NAME is in uppercase (matching the name exactly as

displayed). You can spell out the entire window name, but you really need to
specify only enough letters to identify the window.

If several windows of the same type are visible on the screen, don’t use the
WIN command to select one of them. If you supply an ambiguous name (such
as C, which could stand for CPU or CALLS), the debugger selects the first
window it finds whose name matches the name you supplied. If the debugger
doesn’t find the window you asked for (because you closed the window or
misspelled the name), then the WIN command has no effect.

Close WATCH Window

wr

Syntax

wr

[ {* | 

window name} ]

Menu selection

Watch

→

Reset

Environments

basic debugger

profiling

Description

The WR command deletes all items from a WATCH window and closes the
window.

-

To close the default WATCH window, enter:

wr 

-

To close one of the additional WATCH windows, use this syntax:

wr

windowname

-

To close all WATCH windows, enter:

wr * 

Summary of Contents for TMS320C6 Series

















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands