Using the TMP461EVM Software
20
SBOU152A – July 2015 – Revised September 2019
Copyright © 2015–2019, Texas Instruments Incorporated
TMP461EVM Software Overview
3.2.4 Basic Settings Tab
The Basic Settings tab is where all the device settings and I2C settings are configured.
Figure 3-14. TMP461EVM Basic Settings Tab
3.2.4.1
I2C Configuration
I2C Frequency:
this drop-down sets the I2C clock frequency to either 100 kbps or 400 kbps
I2C Address:
this displays the I2C address of the TMP461
General Call Reset:
clicking this push button will send a General Call Reset of the device
3.2.4.2
Device Configuration
Mask Alert:
setting this checkbox masks the ALERT pin output
THERM2:
setting this checkbox configures pin 6 to the THERM2 output
Shutdown:
setting this checkbox will place the device into shutdown mode
Extended Range:
setting this checkbox will configure the TMP461 for the extended measurement range
Conversion per second:
this slider will set how many temperature conversions the TMP461 will perform
per second
