AIC3256EVM-U Control Software
3
AIC3256EVM-U Control Software
The AIC3256 Control Software (CS) is an intuitive, easy-to-use, powerful tool to learn, evaluate, and
control the TLV320AIC3256. This tool was specifically designed to make learning the TLV320AIC3256
software easy. The following sections describe the operation and installation of this software.
NOTE:
For configuration of the codec, the TLV320AIC3256 block diagram located in the
TLV320AIC3256 data sheet is a good reference to help determine the signal routing.
3.1
AIC3256EVM-U CS Setup
This section provides setup instructions for the AIC3256EVM-U CS.
To install the TLV320AIC3256EVM-U software:
1. Download the latest version of the AIC3256EVM-U Control Software (CS) located in the
TLV320AIC3256EVM-U Product Folder.
2. Open the self-extracting installation file.
3. Extract the software to a known folder.
4. Install the EVM software by double-clicking the Setup executable, and follow the directions. The user
may be prompted to restart their computer.
3.2
AIC3256EVM-U CS Usage
The following sections describe the AIC3256EVM-U CS usage.
4
TLV320AIC3256EVM-U Evaluation Module
SLOU294B – July 2010 – Revised October 2012
Copyright © 2010–2012, Texas Instruments Incorporated