background image

 How to Use This Manual

iii

 

Preface

Read This First

About This Manual

This users guide describes the operation and use of the TLV320AIC12K codec
family. A complete circuit description, schematic diagram, and bill of materials
are also included.

How to Use This Manual

This document contains the following chapters:

-

Chapter 1—EVM Overview

-

Chapter 2—Digital Interface

-

Chapter 3—Analog Interface

-

Chapter 4—EVM Operation

-

Chapter 5—TLV320AIC12KEVM/14KEVM Bill of Materials

-

Appendix A—TLV320AIC12KEVM/14KEVM Schematic

FCC Warning

This equipment is intended for use in a laboratory test environment only. It gen-
erates, uses, and can radiate radio frequency energy and has not been tested
for compliance with the limits of computing devices pursuant to subpart J of
part 15 of FCC rules, which are designed to provide reasonable protection
against radio frequency interference. Operation of this equipment in other en-
vironments may cause interference with radio communications, in which case
the user at his own expense will be required to take whatever measures may
be required to correct this interference.

Summary of Contents for TLV320AIC12K Series


























Reviews: