manualshive.com logo in svg

Texas Instruments TI-Nspire, Manual Book

Share
Download
Texas Instruments TI-Nspire Manual Book Download Page 791

Data Collection and Analysis

779

1. Select 

Experiment > Replay > Advanced Settings

.

The Advanced Replay Settings dialog box is opened.

2. Select which data set to replay from the Data Set drop-down menu.

3. (Optional) Select a new value from the Base Column list.

The selected column will act as the “Time” column for the replay.

Note:

 The base column should be a strictly increasing list of numbers.

4. Select one of the following:

•

Click 

Start

 to start the playback and save your settings.

•

Click 

OK

 to save your settings for use on your next playback.

Note:

 Data Set and Base Column options are dynamic depending on 

number of stored runs and sensor type used.

Note:

 Changing the run in the Data Set selection tool  will not affect 

the playback choice. You must specify which data set in 

Experiment > Replay > Advanced Settings

.

Data Set selection tool:

If you set the replay for run2 and switch to run1, you will not see the 
data replayed.

Striking and restoring data

Data that is struck is not deleted and can be restored. Struck data is 
temporarily ignored when graphing data or performing computations. 
Struck data is shown in the table with a single line through the value. On 
the graph, the struck data points are not visible. At least one point must 
be selected from a table or graph to strike data.

Summary of Contents for TI-Nspire













































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands