www.ti.com
Software Overview
19
SLAU708 – March 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
TAS5782M Evaluation Module
3.7.2
In-System Debugging
This tool helps debug the device which is already integrated in the end-system. This is possible by
connecting the I
2
C signals of the end-system device to the SCL, SDA, and GND test points of PPCMB.
Only Register Map and Direct I
2
C will be available in this mode. Leave the In-System Debugging Mode by
clicking on the Disconnect button on the bottom left corner of the window.
Figure 19. In-System Debugging
