4.1
2 X BTL BDAD (Default: BD mode)
5
Advanced Audio Processing Features in TAS5710
www.ti.com
Advanced Audio Processing Features in TAS5710
Common Configurations:
1.
2
×
BTL BD Mode
2.
2
×
BTL AD Mode
Note:
AD : AD Modulation-Outputs are 180
°
out of phase
BD : BD Modulation
BTL : Bridge-Tied Load
1. Set up the hardware.
2. GDE: Select the Input MUX. In the Properties window, select Modulation scheme as BD for BD Mode.
For AD Mode, select AD.
3. GDE:
Target > Connect
.
4. Finally uncheck the
shutdown
box to bring the device out of Shutdown mode, and adjust the
Master
Volume
as desired.
TAS5710 Process Structure is as shown in GDE:
The three built-in functions in the Properties window are:
1.
Surround (3D): ON/OFF
2.
Bass Boost (Pseudo Bass): ON/OFF
3.
Two-Band DRC (2-Band DRC): ON/OFF
Each of these features are explained as follows:
1.
Surround (3D): ON/OFF
Turn it ON. Then L-R terms get mixed with raw L and R after band-pass filtering. The L-signal is RED,
the R-signal is BLUE, and the L-R signal is BLACK.
SLOU232A – January 2009 – Revised January 2009
TAS5708(TAS5710)EVM
13