Device Configuration
7
SLAU812 – July 2019
Copyright © 2019, Texas Instruments Incorporated
TAS2564YBGEVM-DC User's Guide
•
Select Rate
Figure 7. Windows Playback device Sample Rate
11. Configure the device using the TAS2564 PPC3 Plug-in
5.4
Stereo Setup
Use the following instructions to complete a stereo setup:
1. Install PPC3 with the TAS2564 plug-in
2. Connect a speaker to both J8 and J5 on the TAS2564YBGEVM-DC
3. Set the jumpers at J12 & J13 and J11 & J10 to the unique I
2
C address as shown in
Figure 8. Stereo Setup
4. Configure PPC3-EVM-MB as described in
•
USB control for I
2
C
