Digital Audio Interfaces
9
SLAU809 – June 2019
Copyright © 2019, Texas Instruments Incorporated
TAS2110EVM User's Guide
Figure 8. ASI Interface Pins
To Provide I
2
C from an external source:
•
Remove Jumpers J11 and J9
•
Configure I
2
C for input logic level
–
Remove J8 for 3.3 V
–
Insert J8 for 1.8 V
•
Connect to SDA and SCL through Jumpers J11 and J9
–
Pin 2 is Signal
–
Pin 3 is GND