
CodecControl Software
#w E0 08 04
#Output to Optical
# TX - OFF, TX MUTE - ON, optical disabled
w E0 08 03
# TX MUTE - OFF
w E0 08 01
#----- PLL Configuration -----#
# Set P=2, J=8, D=0
w E0 0F 22
w E0 10 1B
w E0 11 A3
# GPIO1 Config
# GPIO1 = RCVR non-audio data
w E0 1B 06
# GPIO2 Config
# GPIO2 = RCVR non-valid data
w E0 1C 07
# Power Status
# Disable RCVR (/PDRX) and Port B(/PDPB) power down and enable All Function power down
#w E0 01 14
# Unmute Port A Output
w E0 03 29
# Disable All Function power down (all blocks set by local control)
w E0 01 3F
NOTE:
For characteristic performance graphs, refer to the
3
CodecControl Software
This section explains how to use the CodecControl software together with the PCM510x device. While the
PCM510x is only hardware-programmable, the CodecControl software is required to properly configure the
PCM510xEVM-U for different use cases, such as USB playback or optical/SPDIF input to the device.
9
SBAU190A
–
May 2011
–
Revised June 2011
PCM510xEVM-U
Copyright
©
2011, Texas Instruments Incorporated