16
Demonstration Software
SBAU137 – April 2008
Overview
2.1 Overview
Use the demonstration software on a personal computer (PC) or lab PC that meets the following
requirements:
•
Equipped with Microsoft
®
Windows
®
operating system (Windows XP or earlier)
•
Available printer port
•
CD-ROM drive
2.2 Installation
First, connect the PC printer port to CN003 on the DEM-DAI1681 using a standard printer cable.
Next, install the demonstration software. The software is distributed on a CD-ROM that is shipped with the
DEM-DAI1681. The software is also available for download from the
at
To install the software on the PC, first create a new folder on your hard disk drive with an appropriate
name (such as
DEM1681
). Next, load the CD-ROM into the PC, and navigate to the DEM1681 folder on
the CD-ROM. Copy all the files in the DEM1681 directory to the new folder on the PC.
Open the configuration setting file named
dem1608.ini
using a text editor, such as Notepad or WordPad.
When the file is open, search for the following command line:
PCMIFADR = &h378
The address
&h378
indicates the printer port address that the demonstration software uses to
communicate with the DEM-DAI1681. This address must be set to
&h378
,
&h278
, or
&h3BC
. Most PCs
use
&h378
as the default printer port address. If your printer port is not located at
&h378
, edit the address
to correspond with the PC printer port address.
Summary of Contents for PCM1681
Page 1: ...DEM DAI1681 PCM1681 Evaluation Module User s Guide Literature Number SBAU137 April 2008 ...
Page 2: ...Submit Documentation Feedback 2 SBAU137 April 2008 ...
Page 6: ...Submit Documentation Feedback 6 List of Tables SBAU137 April 2008 ...
Page 20: ...Submit Documentation Feedback 20 Demonstration Software SBAU137 April 2008 ...
