Texas Instruments OPA455EVM User Manual Download | Manualshive

Page: 1 / 20

background image

User’s Guide

OPA455EVM Evaluation Module

ABSTRACT

This user's guide describes the characteristics, operation, and use of the evaluation module (EVM) for the
OPA455. The EVM is designed to evaluate the performance of the devices in both single and dual-supply
configurations. This document also includes the schematic, printed circuit board (PCB) layout, and a bill of
materials (BOM). Throughout this document the terms

evaluation board

,

evaluation module

, and

EVM

are

synonymous with OPA455EVM.

WARNING

Danger: HIGH VOLTAGE! This evaluation board is intended for professional use only. It has exposed
high voltages. Do not operate this board without proper high-voltage/high-current safety practices.
Read

before using the EVM.

SBOU240 – OCTOBER 2020

Submit Document Feedback

OPA455EVM Evaluation Module

1

Copyright © 2020 Texas Instruments Incorporated

1
2
3
...
»

Summary of Contents for OPA455EVM





















Reviews:

No comments

Related manuals for OPA455EVM

Brand: Waveshare Pages: 72

Brand: IBASE Technology Pages: 65

Brand: AOpen Pages: 8

Brand: TYAN Pages: 63

Brand: Gigabyte Pages: 116

MPG Z390 GAMING EDGE AC

Brand: MSI Pages: 87

Brand: Gigabyte Pages: 80

Brand: Gigabyte Pages: 76

Brand: Arbor Technology Pages: 68

Brand: Supermicro Pages: 111

Brand: Advantech Pages: 5

Brand: Supermicro Pages: 109

Side-Power SX100/185T

Brand: SLEIPNER MOTOR AS Pages: 16

Brand: Fastrax Pages: 12

Brand: Foxconn Pages: 111

Brand: JETWAY Pages: 48

Brand: MSI Pages: 76

Brand: Micrel Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands