manualshive.com logo in svg

Texas Instruments NS/CLM/1L1/B - NSpire Math And Science Handheld Graphing Calculator, User Manual

Share
Download
Texas Instruments NS/CLM/1L1/B - NSpire Math And Science Handheld Graphing Calculator User Manual Download Page 28

20

Getting Started

You can download an OS upgrade from the Texas Instruments Web site 
to a computer, and use a USB computer cable to install the OS on your 
TI-Nspire™  handheld.

For complete information, refer to the instructions in the chapter on 
TI-Nspire™ Computer Link Software.

Backing up files to a computer

Use the TI-Nspire™ Computer Link Software or TI Connect (with the TI-84 
Plus keypad) to back up the contents of your handheld to a computer. 
TI-Nspire™ Computer Link Software and TI Connect software are 
available on the product CD that came with your handheld. 

Resetting the memory

The 

Reset 

button on the underside of the handheld resets all memory. 

When resetting all memory on the TI-Nspire™ handheld, RAM and Flash 
memory is restored to factory settings. All files will be deleted. All system 
variables are reset to default settings.

Caution:

 Before you reset all memory, consider restoring sufficient 

available memory by deleting only selected data. If you reset all memory, 
the pre-installed apps on your handheld will be deleted.

To reset all memory on the handheld, follow these steps.

1.

Use a paper clip or ball point pen to press the 

Reset

 button on the 

underside of the handheld. 

2.

Hold for three seconds, and release.

Handheld memory is cleared.

When you clear memory, the contrast cometimes changes. If the screen is 

faded or blank, adjust the contrast by pressing 

/ +

 or

 

/ -

.

Summary of Contents for NS/CLM/1L1/B - NSpire Math And Science Handheld Graphing Calculator

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands