manualshive.com logo in svg

Texas Instruments MSP432P401R, Manual

The Texas Instruments MSP432P401R is a powerful microcontroller suited for various applications. Get started instantly with the Quick Start Manual, available for free download from our website. Discover the versatility and capabilities of this product as you effortlessly navigate through its functionalities with our comprehensive user manual.

Share
Download
background image

185

MSP432P401R, MSP432P401M

www.ti.com

SLAS826F – MARCH 2015 – REVISED MARCH 2017

Submit Documentation Feedback

Product Folder Links:

MSP432P401R MSP432P401M

Device and Documentation Support

Copyright © 2015–2017, Texas Instruments Incorporated

Design Kits and Evaluation Modules

MSP432P401R LaunchPad Development Kit

The MSP432P401R LaunchPad development kit enables

you to develop high-performance applications that benefit from low-power operation. The kit
features the MSP432P401R MCU, which includes a 48-MHz ARM Cortex M4F, 80-µA/MHz
active power, and 660-nA standby with RTC operation, a 14-bit 1-MSPS differential SAR
ADC with up to 16-bit ENOB, and an AES256 accelerator.

100-Pin Target Development Board for MSP432P4x MCUs

The MSP-TS432PZ100 is a stand-alone ZIF

socket target board used to program and debug the MSP432 in-system through the JTAG
interface or the Serial Wire Debug (SWD 2-wire JTAG) protocol. The development board
supports all MSP432P4xx flash parts in a 100-pin LQFP package (TI package code: PZ).

Software

SimpleLink MSP432 Software Development Kit (SDK)

The

SimpleLink

MSP432

SDK

is

a

comprehensive software package that enables engineers to quickly develop highly functional
applications on MSP432 MCUs. The SDK is comprised of multiple compatible software
components including RTOS, drivers, and middleware as well as examples of how to use
these components together. In addition, examples are provided to demonstrate the use of
each functional area and each supported device and as a starting point for your own
projects. The SimpleLink MSP432 SDK is part of TI’s SimpleLink platform allowing 100
percent code reuse between SimpleLink MCUs.

RTOS for MSP432 Microcontrollers

MSP432 MCUs offer compatibility with several TI and third party

Real-Time Operating Systems (RTOS). Visit this link to learn about the key features of each
to suit your design needs.

Development Tools

Code Composer Studio Integrated Development Environment for MSP Microcontrollers

Code

Composer Studio is an integrated development environment (IDE) that supports all MSP
microcontroller devices. Code Composer Studio comprises a suite of embedded software
utilities used to develop and debug embedded applications. It includes an optimizing C/C++
compiler, source code editor, project build environment, debugger, profiler, and many other
features. For more information, see the

Code Composer Studio™ IDE 7.1+ for SimpleLink™

MSP432™ Microcontrollers User's Guide

.

ARM

®

Keil

®

MDK – Free 32KB IDE

The ARM Keil MDK is a complete debugger and C/C++ compiler

toolchain for building and debugging embedded applications. Keil MDK supports the low-
power and high-performance MSP432 MCU family, and includes a fully integrated debugger
for source and disassembly level debugging with support for complex code and data
breakpoint. For more information, see the

ARM® Keil® MDK Version 5 for SimpleLink™

MSP432™ Microcontrollers User's Guide

.

IAR Embedded Workbench

®

Kickstart

IAR Embedded Workbench Kickstart for MSP is a complete

debugger and C/C++ compiler toolchain for building and debugging embedded applications
based on MSP430 and MSP432 microcontrollers. The code size limitation of C/C++ compiler
is set to 32KB for MSP432 devices. For more information, see the

IAR Embedded

Workbench

®

for ARM

®

7.x for SimpleLink™ MSP432™ Microcontrollers User's Guide

.

Debuggers for MSP432 Microcontrollers

MSP432 MCUs are designed to work with a variety of

debuggers from Texas Instruments and third-party vendors.

MSP EnergyTrace Technology

EnergyTrace technology for MSP430 microcontrollers is an energy-

based code analysis tool that measures and displays the application’s energy profile and
helps to optimize it for ultra-low-power consumption.

MSP MCU Programmer and Debugger

The MSP-FET is a powerful emulation development tool – often

called a debug probe – that allows users to quickly begin application development on MSP
low-power microcontrollers.

MSP-GANG Production Programmer

The MSP Gang Programmer is an MSP430 and MSP432 device

programmer that can program up to eight identical MSP430 or MSP432 flash or FRAM
devices at the same time. The MSP Gang Programmer connects to a host PC using a
standard RS-232 or USB connection and provides flexible programming options that allow
the user to fully customize the process.

Summary of Contents for MSP432P401R







































































































































































































Reviews:

No comments

Related manuals for MSP432P401R

Eaton A201 Instruction Leaflet preview
A201
Brand: Eaton Pages: 6
ECKELMANN VS 3010 BS Operating Instruction preview
VS 3010 BS
Brand: ECKELMANN Pages: 178
H3C WX Series Registration And Activation Manual preview
WX Series
Brand: H3C Pages: 17
H3C WX Series Getting Started Manual preview
WX Series
Brand: H3C Pages: 32
L-Acoustics LA4X Maintenance Manual preview
LA4X
Brand: L-Acoustics Pages: 24
L-Acoustics LA8 Maintenance Manual preview
LA8
Brand: L-Acoustics Pages: 21
ZKTeco MA500 Installation Manual & User Manual preview
MA500
Brand: ZKTeco Pages: 20
ZKTeco ProFace X Installation Manual preview
ProFace X
Brand: ZKTeco Pages: 8
ZKTeco TF1600 ZKTeco Quick Start Manual preview
TF1600 ZKTeco
Brand: ZKTeco Pages: 10
ZKTeco SpeedFace-V3L User Manual preview
SpeedFace-V3L
Brand: ZKTeco Pages: 121
ZKTeco FaceDepot-7BL Quick Start Manual preview
FaceDepot-7BL
Brand: ZKTeco Pages: 12
ZKTeco C5S110 Installation And Connection Manual preview
C5S110
Brand: ZKTeco Pages: 6
ZiLOG Z8 Encore! XP Quick Start Manual preview
Z8 Encore! XP
Brand: ZiLOG Pages: 12
Quantum NE PLUS Basic Operation Instructions preview
NE PLUS
Brand: Quantum Pages: 20
Danfoss AFD 2 VFG 2 Operating Manual preview
AFD 2 VFG 2
Brand: Danfoss Pages: 8
W.E.ST. SCU-138-P Technical Documentation Manual preview
SCU-138-P
Brand: W.E.ST. Pages: 34
Ltech TT-DX-R4-5A Manual preview
TT-DX-R4-5A
Brand: Ltech Pages: 4
Motor Guard M-60R Instructions preview
M-60R
Brand: Motor Guard Pages: 2

Brands by name

Popular brands

Load more brands