manualshive.com logo in svg

Texas Instruments MSP430x4xx Family, User Manual

The Texas Instruments MSP430x4xx Family user manual is available for download free of cost from our website. Get detailed instructions and information on this versatile product, enabling you to maximize your usage and explore its full potential. Explore and download the manual from manualshive.com today.

Share
Download
background image

DMA Operation

10-13

DMA Controller

Table 10−2. DMA Trigger Operation

DMAxTSELx Operation

0000

A transfer is triggered when the DMAREQ bit is set. The DMAREQ bit is automatically reset
when the transfer starts

0001

A transfer is triggered when the TACCR2 CCIFG flag is set. The TACCR2 CCIFG flag is
automatically reset when the transfer starts. If the TACCR2 CCIE bit is set, the TACCR2
CCIFG flag will not trigger a  transfer.

0010

A transfer is triggered when the TBCCR2 CCIFG flag is set. The TBCCR2 CCIFG flag is
automatically reset when the transfer starts. If the TBCCR2 CCIE bit is set, the TBCCR2
CCIFG flag will not trigger a  transfer.

0011

Devices with USART0: A transfer is triggered when the URXIFG0 flag is set. URXIFG0 is
automatically reset when the transfer starts. If URXIE0 is set, the URXIFG0 flag will not trigger
a transfer.
Devices with USCI_A0: A transfer is triggered when the UCA0RXIFG flag is set. UCA0RXIFG
is automatically reset when the transfer starts. If UCA0RXIE is set, the UCA0RXIFG flag will
not trigger a transfer.

0100

Devices with USART0: A transfer is triggered when the UTXIFG0 flag is set. UTXIFG0 is
automatically reset when the transfer starts. If UTXIE0 is set, the UTXIFG0 flag will not trigger
a transfer.
Devices with USCI_A0: A transfer is triggered when the UCA0TXIFG flag is set. UCA0TXIFG
is automatically reset when the transfer starts. If UCA0TXIE is set, the UCA0TXIFG flag will
not trigger a transfer.

0101

A transfer is triggered when the DAC12_0CTL DAC12IFG flag is set. The DAC12_0CTL
DAC12IFG flag is automatically cleared when the transfer starts. If the DAC12_0CTL
DAC12IE bit is set, the DAC12_0CTL DAC12IFG flag will not trigger a transfer.

0110

A transfer is triggered by an ADC12IFGx flag. When single-channel conversions are
performed, the corresponding ADC12IFGx is the trigger. When sequences are used, the
ADC12IFGx for the last conversion in the sequence is the trigger. A transfer is triggered when
the conversion is completed and the ADC12IFGx is set. Setting the ADC12IFGx with software
will not trigger a transfer. All ADC12IFGx flags are automatically reset when the associated
ADC12MEMx register is accessed by the DMA controller.

0111

A transfer is triggered when the TACCR0 CCIFG flag is set. The TACCR0 CCIFG flag is
automatically reset when the transfer starts. If the TACCR0 CCIE bit is set, the TACCR0
CCIFG flag will not trigger a  transfer.

1000

A transfer is triggered when the TBCCR0 CCIFG flag is set. The TBCCR0 CCIFG flag is
automatically reset when the transfer starts. If the TBCCR0 CCIE bit is set, the TBCCR0
CCIFG flag will not trigger a  transfer.

1001

A transfer is triggered when the URXIFG1 flag is set. URXIFG1 is automatically reset when
the transfer starts. If URXIE1 is set, the 

URXIFG1 flag will not trigger a transfer.

1010

A transfer is triggered when the UTXIFG1 flag is set. UTXIFG1 is automatically reset when the
transfer starts. If UTXIE1 is set, the UTXIFG1 flag will not trigger a transfer

.

1011

A transfer is triggered when the hardware multiplier is ready for a new operand.

1100

A transfer is triggered when the UCB0RXIFG flag is set. UCB0RXIFG is automatically reset
when the transfer starts. If UCB0RXIE is set, the UCB0RXIFG flag will not trigger a transfer.

1101

A transfer is triggered when the UCB0TXIFG flag is set. UCB0TXIFG is automatically reset
when the transfer starts. If UCB0TXIE is set, the UCB0TXIFG flag will not trigger a transfer.

1110

A transfer is triggered when the DMAxIFG flag is set. DMA0IFG triggers channel 1, DMA1IFG
triggers channel 2, and DMA2IFG triggers channel 0. None of the DMAxIFG flags are
automatically reset when the transfer starts.

1111

A transfer is triggered by the external trigger DMAE0.

Summary of Contents for MSP430x4xx Family








































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MSP430x4xx Family

Falcon 4G COMBO User Manual preview
4G COMBO
Brand: Falcon Pages: 24
vPipes Uilleann Quick Start Manual preview
Uilleann
Brand: vPipes Pages: 3
Supermicro SAS-827HD User Manual preview
SAS-827HD
Brand: Supermicro Pages: 16
AXIOMTEK CEM820 Series User Manual preview
CEM820 Series
Brand: AXIOMTEK Pages: 58
Moxa Technologies PT-7324 Series User Manual preview
PT-7324 Series
Brand: Moxa Technologies Pages: 36
Aaeon SBC-555 Manual preview
SBC-555
Brand: Aaeon Pages: 72
VideoWave Adam Device User Manual preview
Adam Device
Brand: VideoWave Pages: 12
Sony Ericsson GC79 User Manual preview
GC79
Brand: Sony Ericsson Pages: 93
Dahua Technology NVR2104/2108HS-W-4KS2 1U User Manual preview
NVR2104/2108HS-W-4KS2 1U
Brand: Dahua Technology Pages: 363
ADTRAN DUAL Nx56/64 1200142L1# User Manual preview
DUAL Nx56/64 1200142L1#
Brand: ADTRAN Pages: 48
ST STA309A Operation Manual preview
STA309A
Brand: ST Pages: 67
NuDAQ ACL-8112 Series User Manual preview
ACL-8112 Series
Brand: NuDAQ Pages: 92
Acces I/O products mPCIE-ADIO16-8F Series Hardware Manual preview
mPCIE-ADIO16-8F Series
Brand: Acces I/O products Pages: 13
M86 Security IR Web Filter User Manual preview
IR Web Filter
Brand: M86 Security Pages: 540
VIA Technologies ARTiGO-A1200 Quick Manual preview
ARTiGO-A1200
Brand: VIA Technologies Pages: 2
Hama 00062773 Quick Manual preview
00062773
Brand: Hama Pages: 10
TP-Link VIGI Quick Start Manual preview
VIGI
Brand: TP-Link Pages: 2
Actelis Networks MetaLIGHT P2MP User Manual preview
MetaLIGHT P2MP
Brand: Actelis Networks Pages: 50

Brands by name

Popular brands

Load more brands