Figure 4-8. Example of Command Use in Console
Table 4-3. Console Macros
Command
Parameters
Explanation
register_name
= register value | -
Write a value to writable I
2
C register or logical register. If no parameter given, will
return the current register value. The logical register names are the same as given in
the data sheet, and must be in uppercase.
Example read: BUCK_LOAD_CURRENT; example write: BUCK0_STARTUP _DELAY
= 10
wait
(time)
Wait for time given in ms. Useful in loops.
iout
(buck number)
Returns the measured load current of the chosen buck core.
0x
address = data
or
address[bits] = data
I
2
C read or write command.
addr = value
examples:
0x12 = 0xaa
0x12[7] = 1
0x12[3:0] = 15
The console supports use of scripts. If a text file containing commands supported by the console is stored in the
same folder with the evaluation software executable, then the script can be launched from the console by typing
the text file name, like script.txt.
GUI Overview
18
The LP875761Q1EVM Evaluation Module
SNVU751 – OCTOBER 2020
Copyright © 2020 Texas Instruments Incorporated
