EVM Description
4
SNAU219B – June 2017 – Revised March 2020
Copyright © 2017–2020, Texas Instruments Incorporated
LMX2595 EVM Instructions – 20-GHz Wideband Low Noise PLL With
Integrated VCO
The serial interface pin description is as follow:
Table 1. Serial Interface Connector Description
NO.
NAME
1
RAMPDIR and CE (Choose with
Resistors on Board)
2
CSB
3
MUXout
4
SDI
5
Not Used
6
GND
7
RampCLK
8
SCK
9
SysRefReq
10
SYNC
2.1
Installing the Software
1. Download TICS Pro from the TI Website at
.
2. Install the software by following the wizard.
3. Search for the LMX2595. In the menu bar, search Select Device
→
PLL + VCO
→
LMX2595.
Figure 4. Search for LMX2595 on TICS Pro
4. You are now ready to use this software. Verify that you can communicate with Reference Pro. Select
Interface under USB communications.
Figure 5. USB Communications on TICS Pro
5. Click on Identify and you will see the LED (MSP430 Supplied) blinks on Reference Pro.
