LMK61XX Evaluation Module (EVM)
LOGO
PCB
Texas I nstruments
FID2
FID1
SV601195
A
PCB Number:
PCB Rev:
PCB Label
LBL1
Size: 0.65" x 0.20 "
Label Tab le
Variant
Label Text
001
LMK61E2 EVM
HARDWARE AND MARKINGS
Label Assembly Note
ZZ1
This Assembly Note is for PCB labels only
ASSEMBLY NOTES
DIMENSIONS:
-- Rectangular shape with height minimized (SMA s board stand offs)
-- Final PCB thickness 62 mil +/- 10% ****
STACKUP:
-- Layer 1: Device layer, Power/GPIO Jumper/Switches, RF microstrip from DUT
to SMA, USB connector, Silks Labeling
===== FR4: 8 mil
-- Layer 2: Ground Plane
===== FR4: 38 mil
-- Layer 3: Split Power planes for USB circuitry and DUT circuitry
===== FR4: 8
-- Layer 4: USB circuitry
Controlled Impedance Traces
-- TOP: 13 mil traces to be 50 ohm Zo +/- 5% reference to L2
LAYOUT NOTE:
PLace 4 standoffs at corners of board.
H3
TCBS-6-01
H4
TCBS-6-01
H2
TCBS-6-01
H1
TCBS-6-01
LOGO
PCB
Pb-Free Symbol
LOGO
PCB
FCC disclaimer
Assembly Note
ZZ2
These assemblies are ESD sensitive, ESD precautions shall be observed.
Assembly Note
ZZ3
These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.
Assembly Note
ZZ4
These assemblies must comply with workmanship standards IPC-A-610 Class 2, unless otherwise specified.
Assembly Note
ZZ5
Default Shunt settings: SH1_2-3 means short Pins 2-3of J2 jumper. For 3-way jumpers, Pin 4 is the 1-pin header.
Assembly Note
ZZ6
Default Shunt settings: SH2_2-3 means short Pins 2-3 of J3 jumper. For 3-way jumpers, Pin 4 is the 1-pin header.
Assembly Note
ZZ7
Default Shunt settings: SH3_2-3 means short Pins 2-3 of J5 jumper. For 3-way jumpers, Pin 4 is the 1-pin header.
Assembly Note
ZZ8
Default Shunt settings: SH4_2-3 means short Pins 2-3 of J6 jumper. For 3-way jumpers, Pin 4 is the 1-pin header.
Assembly Note
ZZ9
Default Shunt settings: SH5_2-3 means short Pins 2-3 of J9 jumper. For 3-way jumpers, Pin 4 is the 1-pin header.
Assembly Note
ZZ10
Default Shunt settings: SH6_2-3 means short Pins 2-3 of J10 jumper. For 3-way jumpers, Pin 4 is the 1-pin header.
EVM Schematic
12
EVM Schematic
18
LMK61E2EVM User's Guide
SNAU188 – October 2015
Copyright © 2015, Texas Instruments Incorporated
