manualshive.com logo in svg

Texas Instruments LMK5C33216EVM, User Manual, Page: 38 / 44

Share
Download
Texas Instruments LMK5C33216EVM User Manual Download Page 38

Figure 6-19. Outputs Page

7 Revision History

NOTE: Page numbers for previous revisions may differ from page numbers in the current version.

Changes from Revision * (October 2020 ) to Revision A (February 2021)

Page

• Updated Power Supplies image.......................................................................................................................

14

• Updated Power Distribution image...................................................................................................................

15

• Updated LMK5C33216 and Input Reference Inputs IN0 to IN1 image.............................................................

16

• Updated Clock Outputs OUT0 to OUT3 image.................................................................................................

17

• Updated Clock Outputs OUT4 to OUT9 image.................................................................................................

18

• Updated Clock Outputs OUT10 to OUT15 image.............................................................................................

19

• Updated XO Schematic image.........................................................................................................................

20

• Updated Logic I/O Interfaces image.................................................................................................................

21

• Updated USB MCU image................................................................................................................................

22

Revision History

www.ti.com

AD
V

A

NCE INFO

R

MA
TION

38

LMK5C33216EVM User's Guide

SNAU260A – OCTOBER 2020 – REVISED FEBRUARY 2021

Submit Document Feedback

Copyright © 2021 Texas Instruments Incorporated

Summary of Contents for LMK5C33216EVM













































Reviews:

No comments