6.5 Using the DPLL1, 2, and 3 Pages
The DPLL pages contain many advanced controls that are normally set during the
Run Script
calculation. They
also contain the DCO Shift control in the top left.
Figure 6-16. Primary DPLL Controls
6.5.1 DPLL DCO
To use the DCO shift controls on a given DPLL, enter the DCO ppb step value into the
DCO Shift Controls (ppb)
box shown above.
6.6 Using the Validation Page
The validation page allows the user to enable/disable different detectors for reference validation along with DPLL
frequency and phase lock requirements.
Figure 6-17. Validation Page
Appendix A - TICS Pro LMK5C33216 Software
AD
V
A
NCE INFO
R
MA
TION
36
LMK5C33216EVM User's Guide
SNAU260A – OCTOBER 2020 – REVISED FEBRUARY 2021
Copyright © 2021 Texas Instruments Incorporated
