5 Power Supply Connection
Connect the power supply source to the SMA connector,
J8
(VDD). Test points,
TP3
(VCC) and
TP4
(GND),
can be used as an alternative power supply source. The decoupling capacitors and ferrite bead isolate the EVM
power from the power pins of the device.
A supply voltage of 1.71 V to 3.465 V can be used for this EVM.
Figure 5-1. Power Supply Connection Layout
Power Supply Connection
SNAU270 – FEBRUARY 2022
LMK1D1208IEVM User's Guide
5
Copyright © 2022 Texas Instruments Incorporated