Figure 5-1. Selecting the LMK04368-EP
5.3 Program the Device
To program, press
Ctrl+L
.
Alternatively, click
USB communications → Write All Registers
from the menu to program the device to the
current state of the register map to the device.
Ctrl+L
is the accelerator key assigned to the
Write All Registers
option and is very convenient.
Figure 5-2. Loading the Device
After the device is initially loaded, TICS Pro will automatically program changed registers, so it is not necessary
to reload the device upon subsequent changes in the device configuration. It is possible to disable this
functionality by ensuring there is no checkmark by the
Options → AutoUpdate
.
A default mode will be restored in the next step, therefore this step is not necessary. It is included, however, to
emphasize the importance of pressing Ctrl+L to load the device at least once after starting TICS Pro, restoring a
mode, or restoring a saved setup using the
File
menu.
See TICS Pro instructions located at
http://www.ti.com/tool/ticspro-sw/
5.4 Restoring a Default Mode
Click
Default configuration → CLKin1 122.88 MHz, OSCin 122.88 MHz, VCO1 2949.12 MHz
. Press
Ctrl+L
to
restore the default configuration.
Figure 5-3. Setting the Default Configuration for LMK04368-EP
Using TICS Pro to Program the LMK04368-EP
6
LMK04368EPEVM User’s Guide
SNAU283 – OCTOBER 2022
Copyright © 2022 Texas Instruments Incorporated
