Sensing Solutions EVM GUI
25
SNOU144 – December 2016
Copyright © 2016, Texas Instruments Incorporated
LDC2114 Evaluation Module for Inductive Touch Inductance to Digital
Converter
Figure 24. Loading Previously Saved Register Values from File on Register Page
2. Select the JSON file with the desired settings and click
Open
.
4.7
Configuring the EVM Using the Configuration Page
The Sensing Solutions GUI is capable to configure the device in a more intuitive way than through the
direct register values. The
Configuration
page provides an easy-to-use tool for updating the device
configuration and provides additional information about how the device will perform.
4.7.1
Changing registers through the Configuration Pane
The device configuration must only be changed while STATE_RESET=b1. This mode can be entered
while selecting the appropriate option in the
Reset Mode
section of the
Global Buttons Settings
. After
changing the configuration, the
Reset Mode
must be changed back to
Active processing
, as shown in