2 Quick Start
1. Click
in Safari, Firefox, or Chrome and select the HDC3020EVM GUI from the gallery to access the
cloud-based GUI. Follow the onscreen instruction to complete TI Cloud Agent setup.
Figure 2-1. HDC3020EVM GUI on First Start-Up
2. Reload the browser window after installation to access the home screen of the HDC3020EVM GUI.
3. Connect the HDC3020EVM to the USB port of your computer through the USB. Drivers for the device will
install automatically and the GUI will connect to the EVM.
4. Temperature and humidity data can be recorded and logged on the
Data Capture
tab. Select the
icon
to navigate to this page. You can enable register auto-read from this page, and initiate a one-shot to take
sample data.
5. Configure device settings from the
Device Configuration
tab
.
Quick Start
SNAU267A – JUNE 2021 – REVISED JUNE 2021
HDC3020EVM User Guide
3
Copyright © 2021 Texas Instruments Incorporated