DIGITAL VIDEO GENERATOR
DIGITAL
VIDEO
GENERATOR
Digital Video Source
OpenLDI LVDS
Contents of Demo Kit
Logic Analyzer / Oscilloscope
DS90Ux929
EVM Board
Deserializer
Board
FPD-Link III
HDMI/DP++
Display
HDMI/DP++
Generator
OpenLDI
LVDS
DS90Ux929
EVM Board
Deserializer
Board
FPD-Link III
Contents of Demo Kit
Graphics Controller /
Video Processor Board
Typical Connection and Test Equipment
1.13 Typical Connection and Test Equipment
The following is a list of typical test equipment that may be used to generate signals for the Serializer
inputs:
1. Digital Video Source – for generation of specific display timing such as Digital Video Processor or
Graphics Controller (GPU) with HDMI output.
2. Any other signal generator / video source - This video generator may be used for video signal sources
for DVI or DP++
3. Any other signal / video generator that provides the correct input levels as specified in the datasheet.
The picture below shows a typical test set up using a Graphics Controller and display.
Figure 1-22. Typical Test Setup for Video Application
The picture below shows a typical test set up using a video generator and logic analyzer.
Figure 1-23. Typical Test Setup for Evaluation
25
SNLU172 – January 2015
DS90Ux929EVM User's Guide
Copyright © 2015, Texas Instruments Incorporated
