MIPI CSI-2
Processor
SoC
DS90UB96X-Q1
FPD-Link III HUB
D3+/-
D2+/-
D1+/-
D0+/-
CLK+/-
FPD-Link III
Serializer
I2C
GPIO
FPD-Link III
Coax or STP
FPD-Link III
Serializer
FPD-Link III
Serializer
FPD-Link III
Serializer
System Requirements
7
SNLU177 – July 2016
Copyright © 2016, Texas Instruments Incorporated
DS90UB96X-Q1EVM User's Guide
1.3
System Requirements
The major components of the DS90UB96X-Q1EVM are:
•
DS90UB964-Q1
•
On-board Power-over-Coax (POC) interface
•
Four Fakra coax connectors for digital video, power, control and diagnostics
•
Samtec QSH type connectors on CSI-2 interfaces
•
On-board I
2
C programming interface
In order to demonstrate, the following is required (not included):
1. Four Omnivision sensor boards with DS90UB913A Serializer boards
(a) TI DS90UB913A-CXEVM OR TI SAT0088 ‘MiniSer’
AND
(b) OV10635 P/N: OV10635-EAAE-AA0A OR OV10640 P/N: OV10640-EAAA-AA0A (DVP)
2. Four TIDA-00262 Aptina AR0140 sensor modules and DS90UB913A Serializer
3. Four DACAR/FAKRA coax cables
4. I
2
C host controller that support clock stretching
5. Applications Processor Card
6. Power supply for 12V @ 2A
1.4
Contents of the Demo Evaluation Kit
•
One EVM board with the DS90UB96X-Q1
1.5
Applications Diagram
Figure 1-1. Applications Diagram