Texas Instruments DS90C189-Q1EVM, User Manual, Page: 2 / 25

DS90C189-
Q1 SER
1.8 V
L
A
T
C
H
&
P
2
S
PLL
Single Pixel
R[7:0] G[7:0]
B[7:0]
HS
VS
DE
GPO/CNTL (L/R)
PCLK
PDB
FPD-Link III
Interface
Display (TCON)
GPU
±
Jacinto 6
1.8 V LVCMOS
(24 bit RGB + HS/VS/DE)
2 Channels OLDI (LVDS)
(4 Data + Clock)
Copyright © 2017, Texas Instruments Incorporated
DS90UB947
-Q1 SER
2 Lanes FPD-Link III
DOUT0+
DOUT0-
DOUT1+
DOUT1-
RIN0+
RIN0-
RIN1+
RIN1-
Features
www.ti.com
2 SNLU236 – May 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
DS90C189-Q1EVM User Guide
1 Features
• Qualified for Automotive Applications
• AEC-Q100 Qualified for Automotive Applications with the following results:
– Device Temperature Grade 2: -40°C to +105°C Ambient Operating Temperature
– Device HBM ESD Classification Level ±8kV
– Device CDM ESD Classification Level ±750V
• 150 mW typical power consumption at 185 MHz (SIDO mode)
• Drives QXGA and WQXGA class displays
• Two operating modes:
– Single Pixel In, Single Pixel Out (SISO), 105MHz max
– Single Pixel In, Dual Pixel Out (SIDO), 185MHz
• Supports 24 bit RGB
• Supports 3D+C, 4D+C, 6D+C, 6D+2C, 8D+C, and 8D+2C LVDS configurations
• Compatible with FPD-Link, and FlatLink Devices
• 1.8V VDDIO and Core Supply
• Interfaces directly with 1.8V LVCMOS
• Less than 1mW power consumption in Sleep Mode
• Spread Spectrum Clock compatible
• Small 9mm x 9mm x 0.9 mm 64-pin VQFN package
2 Applications
Figure 1. Applications Diagram