Software Description
19
SNLU214A – July 2016 – Revised September 2019
Copyright © 2016–2019, Texas Instruments Incorporated
DS280DF810EVM User’s Guide
2.2.4.7
PRBS Tab
The PRBS tab within the High-Level page allows the user to configure the PRBS generator or Checker
functions on any of the channels of the DS280DF810 retimer.
•
To enable PRBS Generator on a channel:
–
Select the desired channel using the
Channel Select
pull-down.
–
Select the desired pattern using the
Pattern Type
pull-down.
–
Set desired Polarity via pull-down, Non-Invert or Invert.
–
Click
Enable
button.
Figure 18. PRBS Tab, PRBS Generator Configuration