Texas Instruments DRV8410EVM, User Manual

Page: 5 / 18

2 Connection Descriptions
Figure 2-1. DRV8410EVM and DRV8411EVM Overview of Connectors and Test Points
Figure 2-2. DRV8411AEVM Overview
Table 2-1. Test Points and Jumpers
Name Description
A
• J5: Sets action of push button (S1)
– RST: MCU reset
– PUSH: Debug and testing purpose (NOT used in this EVM)
• S1: Push button
B
• J3: Connector between eZ-FET-Lite and MSP430G2553 (U5)
C
• J1: Micro USB 2.0 connector
D
• J4: Main power connector
E
• J7: Connects AISEN and BISEN when operating in parallel h-
bridge mode.
F
• J10: AOUT1 and AOUT2 connector
• J11: BOUT1 and BOUT2 connector
G
• Test points for control input signals and other feedback signals
going to the MCU (U5).
H
• J9: Header connecting signals from DRV and other feedback
signals to the MCU. Remove the shunts in order to use an
external signal or MCU.
www.ti.com Connection Descriptions
SLEU121 – FEBRUARY 2022
Submit Document Feedback
DRV8410_DRV8411_DRV8411AEVM User's Guide 5
Copyright © 2022 Texas Instruments Incorporated