Texas Instruments DRV8328 EVM Series, User Manual, Page: 5 / 29

GND
PVDD
Motor Phase C
Motor Phase B
Motor Phase A
Figure 3-2. Connections from motor to DRV8328AEVM
Figure 3-3 and Figure 3-4 shows where the Micro-USB cable is plugged in to the LAUNCHXL-F280049C to
provide communication between the LaunchPad firmware and GUI as well as the correct installment of the
DRV8328AEVM to the J1/J3 and J2/J4 headers of the LaunchPad.
www.ti.com Hardware and Software Overview
SLVUCD3A – NOVEMBER 2021 – REVISED AUGUST 2022
Submit Document Feedback
DRV8328xEVM User's Guide 5
Copyright © 2022 Texas Instruments Incorporated