Texas Instruments DRV2667 User Manual Download Page 1 | Manualshive

Page: 1 / 36

Texas Instruments DRV2667 User Manual Download Page 1

User's Guide

SLOU323 – June 2013

DRV2667 Evaluation Module

The DRV2667 is a digital interface, high-voltage driver designed to control Piezo actuators with voltages
between 40 Vpp and 200 Vpp. The DRV2667 eliminates many design complexities of driving Piezo by
including an integrated 100-Vpp boost converter and 200-Vpp differential output amplifier. In addition, the
digital control interface (I

2

C™) includes real-time waveform playback, a waveform generator, and

embedded RAM for waveform storage.

The DRV2667EVM-CT Evaluation Module (EVM) kit is a complete demonstration and evaluation platform
for the DRV2667. The kit includes a microcontroller, Piezo actuator, sample waveforms, and capacitive
touch buttons which can be used to completely demonstrate and evaluate the DRV2667.

This document contains instructions for setup and operation of the DRV2667EVM-CT, as well as an in-
depth description and examples of haptic waveforms for Piezo actuators.

Evaluation kit contents

•

DRV2667EVM-CT demonstration and evaluation board

•

Mini-USB cable

Tools needed for programming and advanced configuration

•

Code Composer Studio™ (CCS) or IAR Embedded Workbench IDE for MSP430

•

MSP430 LaunchPad (MSP-EXP430G2) or MSP430-FET430UIF hardware programming tool

•

DRV2667EVM-CT firmware

WARNING

This evaluation board contains high voltages, up to 200 Vpp.
Please use the necessary precautions when using this board.

Code Composer Studio is a trademark of Texas Instruments.
I

2

C is a trademark of NXP.

1

SLOU323 – June 2013

DRV2667 Evaluation Module

Submit Documentation Feedback

Copyright © 2013, Texas Instruments Incorporated

1
2
3
...
»

Summary of Contents for DRV2667





































Reviews:

No comments