Power-On Sequence and Connection With User Specific Motor
15
SLOU476 – August 2017
Copyright © 2017, Texas Instruments Incorporated
DRV10987 Evaluation Module User's Guide
Figure 14. OverRide Selected
Step 15. Enter values from 0 (stopped) to 511 (full speed) in the
Speed
text box to control the speed.
Step 16. When complete, enter a value of 0 in the
Speed
text box and deselect the
OverRide
checkbox.
6
Power-On Sequence and Connection With User Specific Motor
When the supplied motor is evaluated, a user motor can be evaluated. The DRV10987 EVMs are shipped
with default EEPROM settings for all registers, which may or may not be suitable to operate the target
motor. To connect the user motor to the EVM, follow the steps listed in
to avoid any damage to
the EVM.
To successfully tune a user motor, refer to the
.
7
Schematic and Bill of Materials
This section contains the DRV10987 schematic and bill of materials (BOM).
7.1
Schematic
shows the DRV10987 schematic.
