Texas Instruments DLP NIRscan User Manual Download Page 52

Page: 52 / 73

Project Settings

www.ti.com

3. Find the location of the Mobile Spectroscopy Tiva EVM by browsing to the install directory of the

sources: C:\ti\DLPNIRscanNanoSoftware_1.0.0\Sources.

4. Make sure all the other libraries are compiled and imported before this step. Then, compile this newly

added Mobile Spectroscopy Tiva EVM project by selecting Clean from the Project Menu. Ensure that
dlpspeclib project is checked and select "Build only the selected project" and then click OK.

C.3

Project Settings

The compilation of the Tiva sources and libraries requires the following project settings by right clicking on:

•

On Project Browser, select Mobile Spectroscopy Tiva EVM. Right-click and select "Show Build
Settings..."

•

Under CCS General, select the Main tab. Ensure that the Compiler version is TI v5.2.4.

•

Under CCS General, select the RTSC tab. Ensure that TI-RTOS for TivaC is set to 2.10.1.38 and
XDCtools version is 3.30.4.52_core.

•

Repeat this for all libraries.

How to Compile Tiva Source Code

DLPU030B – June 2015 – Revised July 2015

Submit Documentation Feedback

Summary of Contents for DLP NIRscan









































































Search results

Summary of Contents for DLP NIRscan

Reviews:

Texas Instruments DLP NIRscan, User Manual, Page: 52 / 73

Search results

Summary of Contents for DLP NIRscan

Reviews: