Creating A Simple Pattern Sequence
23
DLPU028C – October 2014 – Revised November 2016
Copyright © 2014–2016, Texas Instruments Incorporated
Quick Start
4.
Select the second pattern and choose a bit depth of 1. Set exposure to 150000 µs, dark time to 75000
µs, and select
Green
for the color.
5. Select the third pattern and choose a bit depth of 1. Set exposure to 200000 µs, dark time to 100000
µs, and select
Blue
for the color.
shows the pattern sequence.
6. Select the
Repeat
radio-button to continuously repeat the pattern sequence.
7. Click the
Update LUT
button to upload the pattern sequence definition including the three pattern
images to the EVM.
8. Click the
Start
button to run the pattern sequence.
9. Click the
Stop
button to stop the pattern sequence.
Figure 2-1. Pattern Mode Panel