Texas Instruments DAC53608, User Manual

Page: 10 / 31

Detailed Description
www.ti.com
10 SLAU790A – October 2018 – Revised December 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
DAC53608 Evaluation Module
3.1.2 Signal Definition of BOOSTXL-DAC-PORT
The BOOSTXL-DAC-PORT provides hardware connectors for the Analog EVM Controller (J13, J14),
External Power (J12), DAC53608EVM (J1, J2), and External Function Extender (J4, J5). The descriptions
are provided in the following tables.
Table 6. BOOSTXL-DAC-PORT J13 Pin Definitions
Pin# Signal Description
11 GPIO General purpose I/O
12
CS SPI CS or General purpose
I/O
13 GPIO SPI
14 MISO SPI MISO
15 MOSI SPI MOSI
16 RST MCU Reset Output
17 GPIO General purpose I/O
18 GPIO General purpose I/O
19 GPIO General purpose I/O
20 GND Ground
31 GPIO General purpose I/O
32 GPIO General purpose I/O
33 GPIO General purpose I/O
34 GPIO General purpose I/O
35 EXT_LDAC External LDAC I/O
36 EXT_LDAC External LDAC I/O
37 SPI_BUF_EN Digital, SPI Buffer Enable
38 GPIO General purpose I/O
39 GPIO General purpose I/O
40 GPIO General purpose I/O
Table 7. BOOSTXL-DAC-PORT J14 Pin Definitions
Pin# Signal Description
1 +3.3V +3.3V Power Supply
2 GPIO General purpose I/O
3 GPIO General purpose I/O
4 GPIO General purpose I/O
5 GPIO General purpose I/O
6 GPIO General purpose I/O
7 SCLK_A0 SPI SCLK or I2C A0
8 GPIO General purpose I/O
9 SCL I2C SCL
10 SDA I2C SDA
21 +5V +5V Power Supply
22 GND Ground
23 GPIO General purpose I/O
24 GPIO General purpose I/O
25 VDD_SENSE Sense Input for VDD
26 VIO_SENSE Sense Input for VIO
27 GPIO General purpose I/O
28 GPIO General purpose I/O