Texas Instruments DAC348 Series, User Manual, Page: 10 / 25

Software Control
www.ti.com
2.2.5 Register Control
• Send All: Sends the register configuration to all devices
• Read All: Reads register configuration from DAC348x device
• Load Regs: Load a register file for all devices. Sample configuration files for common frequency plans
are located in the install directory: C:\Programs Files\Texas Instruments\DAC348x\EVM Configuration
File Released.
– Select Load Regs button.
– Double click on the EVM Configuration File Released folder and respective sub-folders for the
EVM.
– Double click on the desired register file.
– Click on Send All to ensure all of the values are loaded properly.
• Save Regs: Saves the register configuration for all devices
2.2.6 Miscellaneous Settings
• Reset USB: Toggle this button if the USB port is not responding. This generates a new USB handle
address
– Note: It is recommended that the board be reset after every power cycle and the “ reset usb ” button
on the GUI be clicked.
Figure 7. USB Port Reset
• Exit: Stops the program
10 DAC348x EVM SLAU432 – February 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated