Texas Instruments CC2520, User Manual

Page: 13 / 45

swru138
13/33
5.4 Using SmartRF Studio with SmartRF05EB and CC2520EM
In order to use the SmartRF Studio the CC2520EM is connected directly to the
SmartRF05EB, as shown in the picture below.
Figure 11 - CC2520EM connected to SmartRF05EB
After installation of SmartRF Studio and plugging the EB to the PC via USB, the driver can be
installed as described in chapter 5.2. When starting SmartRF Studio, the following window
should appear:
Make sure you select the tab called SmartRF® 05 DK. The connected evaluation board
should be listed, showing that a CC2520 is available. Double click on the item, and a new
window will appear.