manualshive.com logo in svg

Texas Instruments Cabri Geometry II, Manual Book

Share
Download
Texas Instruments Cabri Geometry II Manual Book Download Page 95

Chapter 10: Using the Check Property Toolbox         10-3

Copying permitted provided TI copyright notice is included
© 1997, 1999 Texas Instruments Incorporated

Parallel

The

 

Parallel

 

tool evaluates any combination of 

two

 selected lines, segments, rays, vectors, axes, or

sides of a polygon to determine whether or not they are parallel. The results are reported in text.

Check parallelism

1.

Select 

Parallel 

from the 

Check Property

 toolbox.

2.

Select any combination of two lines, segments, rays,
vectors, axes, or sides of a polygon.

A marquee box appears after the last selection.

3.

Move the pointer to move this box anywhere in the
drawing window, and click to display the result.

If you change the objects so that the property
changes, the displayed text changes accordingly.

Select two linear objects.

Click to place the marquee box.

The result changes with the construction.

Objects are not parallel

Objects are parallel

Summary of Contents for Cabri Geometry II









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands