manualshive.com logo in svg

Texas Instruments Cabri Geometry II, Manual Book

Share
Download
Texas Instruments Cabri Geometry II Manual Book Download Page 101

Chapter 11: Using the Measure Toolbox         11-3

Copying permitted provided TI copyright notice is included
© 1997, 1999 Texas Instruments Incorporated

Area

The 

Area

 tool calculates and displays the area of a selected polygon, circle, or ellipse.

The default measurement is displayed in square centimetres. You can change its precision by using

Numerical Edit

 in the 

Display

 toolbox.

You can add a comment to the measurement immediately after creating it by typing the text. See
“

Comments”

 in the chapter “Using the Display Toolbox” for more information on adding a comment

to a numerical value.

Checking area

1.

Select 

Area

 from the 

Measure

 toolbox.

2.

Select the polygon, circle, or ellipse whose area you
want to measure.

Select the object.

The result is displayed.

Moving measurements

Reposition the measurement by selecting it with the 

Pointer

tool and dragging it to a new position.

The measurement moves with the object it measures
unless you pull it away. When you pull it away from the
object, the measurement momentarily resists before
pulling away.

This polygon

Summary of Contents for Cabri Geometry II









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands