Texas Instruments bqTESLA bq500414Q, User Manual, Page: 4 / 29

Connector and Test Point Descriptions
www.ti.com
4.2.6 TP6 – Reserved
Reserved – no connection.
4.2.7 TP7 – Reserved
Reserved – no connection
4.2.8 TP8 – COIL1.3
Output from bq500414Q, low enables coil 3 drive.
4.2.9 TP9 – 12Vdc
System regulated 12V from VIN
4.2.10 TP10 - Reserved
Reserved – no connection
4.2.11 TP11 – Shield / No Shield
Input to configure bq500414Q to operate with EMI shield, PWR633. Low = no shield, high (3.3V) = shield
4.2.12 TP12 – 12Vdc Feedback
Feedback circuit for 12V regulator
4.2.13 TP13 – GND
Ground test point connection
4.2.14 TP14 – I_SENSE
Current as measured in the system 12V supply
4.2.15 TP15 – COMM-
Sample of coil voltage return for communications with RX
4.2.16 TP16 – COMM+
Sample of coil voltage for communications with RX
4.2.17 TP17 – Reserved
Reserved – no connection.
4.2.18 TP18 – DPWM-1A
PWM Output to half bridge drivers
4.2.19 TP19 – Reserved
Reserved – no connection.
4.2.20 TP20 – GND
Ground test point connection
4 bq500414Q bqTESLA Wireless Power TX EVM SLVUA40A – March 2014 – Revised January 2015
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated