Figure 4-1. Resistors to Desolder Topside
Figure 4-2. Resistors to Desolder Underside
4.3 High Voltage Networks
4.3.1 High Voltage Safety Considerations
When connecting to any of the high voltage networks, it is imperative that extreme safety precautions are taken.
The user should assume the entire board is live with high voltage once an HV connection is made. The high
voltage connection points and the areas on the EVM where these voltages are dissipated are shown in the figure
below. Extra care should be taken around this area of the EVM.
Connectors
SLUUCC3 – FEBRUARY 2021
BQ79631EVM Evaluation Module
13
Copyright © 2021 Texas Instruments Incorporated
