Texas Instruments BQ25120F3A, Manual

Page: 6 / 74

8 Specifications
8.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)
(1)
MIN MAX UNIT
Input voltage
IN wrt GND –0.3 20 V
PMID, VINLS wrt GND –0.3 7.7 V
CD, SDA, SCL, ILIM, ISET, IPRETERM, LSCTRL,
INT, RESET, TS
wrt GND –0.3 5.5 V
Output voltage SYS 3.6 V
Input current IN 400 mA
Sink current INT 10 mA
Sink/Source Current RESET 10 mA
Output Voltage Continuos SW –0.7 7.7 V
Output Current Continuous
SW 400 mA
SYS, BAT 300 mA
Current LS/LDO 150 mA
BAT Operating Voltage VBAT, MR, 6.6 V
Junction Temperature –40 125 °C
Storage Temperature, T
stg
–55 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress
ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under
Recommended Operating Conditions . Exposure to absolute-maximum-rated conditions for extended periods may affect device
reliability.
8.2 ESD Ratings
VALUE UNIT
V
(ESD)
Electrostatic discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001
(1)
±2000
V
Charged device model (CDM), per JEDEC specification JESD22-
C101
(2)
±500
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
8.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
MIN NOM MAX UNIT
V
IN
IN voltage range 3.4 5 20
V
IN operating voltage range, recommended 3.4 5 5.5
V
(BAT)
V
(BAT)
operating voltage range 5.5
(1)
V
V
(VINLS)
VINLS voltage range for Load Switch 0.8 5.5
(2)
V
V
(VINLS)
VINLS voltage range for LDO 2.2 5.5 V
I
IN
Input Current, IN input 400 mA
I
(SW)
Output Current from SW, DC 300 mA
I
(PMID)
Output Current from PMID, DC 300 mA
ILS/LDO Output Current from LS/LDO 100 mA
I
(BAT)
, I
(SYS)
Charging and discharging using internal battery FET 300 mA
T
J
Operating junction temperature range –40 125 °C
(1) Any voltage greater than shown should be a transient event.
(2) These inputs will support 6.6 V for less than 10% of the lifetime at V
(BAT)
or VIN, with a reduced current and/or performance.
BQ25120F3A
SLUSDI4A – OCTOBER 2018 – REVISED APRIL 2021
www.ti.com
6 Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated
Product Folder Links: BQ25120F3A