Revision History
www.ti.com
12
SLUU258B – November 2007 – Revised July 2017
Submit Documentation Feedback
Copyright © 2007–2017, Texas Instruments Incorporated
Revision History
A data file can also be saved by going to
File|Save Data File
. The data that is saved in the file is the data
displayed on the grids representing the EPROM memory map.
8.3.2
Status Bytes
This section allows the user to read or write the EPROM Status bytes of the bq2022A. The registers are
programmed by clicking on the appropriate grid, entering the desired value, and pressing ENTER.
Buttons are provided for the user to select specific pages for write protection. By selecting any of the
Write
Protection Bits
button, register 0x00 of status registers is written automatically so that the corresponding
bit is cleared.
Note that the status registers are EPROM. Once a bit has been cleared, it cannot be set.
Figure 7. DATA Page
Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from A Revision (October 2013) to B Revision
...............................................................................................
Page
•
Added note regarding EV2400 board versions.
.......................................................................................
2
