Quick Views of Evaluation Setups for LVDS Interface
7
SLOU430A – December 2015 – Revised February 2016
Copyright © 2015–2016, Texas Instruments Incorporated
AFE5818 16-Channel Analog Front End Evaluation Module (EVM Rev. C)
Equipment:
Signal generators (with low-phase noise) must be used as source of the input signal
(0.01 MHz to 40 MHz) for optimal performance. An on-board crystal oscillator option is provided so that an
external clock source is not needed for basic capture. Additionally, for best performance a band-pass filter
(BPF) is recommended on the analog input signal to attenuate the harmonics and noise from the signal.
For coherent sampling or custom sample rate, an external clock is provided to J35 (GUI configuration is
required for the external clock configuration). For more information on clock configuration, see
.
