C50
C52
External ADC Sampling Clock
Figure 8. Relevant Capacitors for CW Mode, Bottom Side
10
External ADC Sampling Clock
To use the external clock generator to test the AFE5807/08, perform the following steps.
1. Reconfigure JP9 as shown in the following illustration. The rest of the jumpers remain the same.
2. Connect the external generator as shown in
.
3. Set the generator output to 40 MHz, 13 dBm.
16
AFE5807/08EVM (Rev D) Evaluation Module
SLOU309
–
December 2010
Copyright
©
2010, Texas Instruments Incorporated