Texas Instruments ADS9224REVM-PDK User Manual Download Page 10 | Manualshive

Page: 10 / 34

Texas Instruments ADS9224REVM-PDK User Manual Download Page 10

Setup

10

SBAU315A – July 2018 – Revised June 2019

Submit Documentation Feedback

Copyright © 2018–2019, Texas Instruments Incorporated

ADS9224REVM-PDK

5.2

EVM Graphical User Interface (GUI) Software Installation

Download the latest version of the EVM GUI installer from the

Tools and Software

folder of the

ADS9224R, and run the GUI installer to install the EVM GUI software on the user’s computer.

NOTE:

Manually disable any antivirus software running on the computer before downloading the

EVM GUI installer onto the local hard disk. Otherwise, depending on the antivirus settings,
an error message may appear or the

installer.exe

file may be deleted.

Accept the license agreements and follow the onscreen instructions to complete the installation.

Figure 4. ADS9224R Software Installation Prompts

As a part of the ADS9224REVM GUI installation, a prompt with a

Device Driver Installation

will appear on

the screen. Click

Next

to proceed.

Figure 5. Device Driver Installation Wizard Prompts

«
...
8
9
10
11
12
...
»

Summary of Contents for ADS9224REVM-PDK



































Reviews:

No comments